DAB LAB FLUX NAIL AND DOME

Description You may want to season your Titanium nail before use, to avoid any unpleasant taste. This can be done 2 ways HEAT AND ICE Fill a durable bowl with ice water. It’s best if the bowl is made of metal or hard plastic, as it may experience extreme temperature change and be exposed to high levels of heat. Hold the titanium nail in place with a pair of pliers, or anything large that won’t melt and/or transfer the heat to your hands. Use a torch to heat the nail until it’s glowing red. This should take less than a minute. Switch off the torch and slowly lower the nail into the ice water. Swirl it in the water so any chemicals and residue on the nail are washed away. Lift the nail out of the water and shake it off before heating again. Repeat this process at least three times to thoroughly rinse all residue from the surface of the nail Clean the nail with an isopropyl alcohol solution, rinse, and let fully dry before your first session. OIL Place the nail into your rig and light the nail with a torch until it glows bright red. Turn off the torch and grab your dabbing oil. Use a dabber to coat the nail with the oil. Make sure to coat every surface you will be using for your dabs in the future. Allow the nail to cool and then coat with oil 3-5 more times until thoroughly seasoned. You can either use this nail right away for a session or clean it for a future use. To clean, remove the nail from the rig and place it in an isopropyl alcohol solution for about 10 minutes. Rinse, and then leave it to dry until your next session   DAB LAB FLUX NAIL & DOME£12.99